bulletfishing® Kontiki Timer - Bluetooth App controlled
Join the bulletfishing® technology revolution!
Set motor run time from 1 to 39 minutes in 1 minute increments with your Andriod phone.
Password protected. If your kontiki is lost or stolen it will not be able to be used to its full capacity unless your unique password is entered when first pairing the timer to phone.
Low battery cutout. Don't damage your batteries by over discharging them. Our system leaves approx 20% capacity in your batteries.
Comes with heavy duty relay.
Our Patented Auto-start sensor is built into the waterproof timer body. After setting the kontiki run time, the motor starts when the kontiki is placed in the water, no buttons to push or switches to fiddle with while standing in the waves.
Easy to fit, no holes to drill, just supply 12v power and connect one relay terminal to motor + wire and other relay terminal to battery +, mount the timer to the inside of the hull and attach in place using a suitable glue or double sided tape. Place the "Auto-start" decal on the outside of the hull to indicate the timer position
Note #1 The timer must be secured firmly inside the hull with the rounded face to the top for the Auto-start sensor to work,
Note #2 Make sure nothing is placed over the sensor when connecting the batteries as the Auto-start sensor calibrates itself on power up, it may not work properly if for instance a hand is placed over it when the batteries are connected. If this happens simply remove the power and reconnect to re-calibrate.
Note #3 The sensor will work through a plastic or fiberglass hull with a maximum thickness of about 10mm, it will not work through a metal hull.
A great fishing day, its the bullet way!